Home > Online water quality electrode > online ammonium ion detector
Products
  • Water Quality Sensor
  • Water Quality Testing
  • Online water quality electrode
  • Buoy Shore Station Series
  • online ammonium ion detector

    Ammonium ion selective electrode has the advantages of simple measurement and accurate response. It can be used by PH meter, ion meter and online ammonia nitrogen analyzer. It is widely used in biological samples ammonia nitrogen, soil ammonia nitrogen, surface water ammonia nitrogen, sewage ammonia nitrogen, and the online determination of ammonia nitrogen in water.

    measuring principle

    The selective electrode of online ammonium ion detector is an effective method to measure the ammonia nitrogen content in samples. Ammonium ion-selective electrodes are also often used in on-line instruments, such as the determination of ammonia nitrogen content in water.

    Ammonium ion selective electrode has the advantages of simple measurement and accurate response. It can be used by PH meter, ion meter and online ammonia nitrogen analyzer. It is widely used in biological samples ammonia nitrogen, soil ammonia nitrogen, surface water ammonia nitrogen, sewage ammonia nitrogen, and the online determination of ammonia nitrogen in water.

     

    Application:

    ammonium ion measurement of boiler feed water; ammonium ion measurement of surface water, ammonium ion measurement of fertilizer.

     

    Sensing technical parameter

    gradient55± 3mv
    repetitiveness± 2%
    disturbpotassium ion
    temperature range0-50°C
    pressure limit0-2 atm
    response speedIn 30 seconds to reach a 95% response
    lay inLong-term: dry preservation;

    Short-term: stored in a diluted ammonium standard solution;
    measuring range0.1ppm –18000ppm ;
    PH range4-10PH
    output impedence20-50MΩ
    Maintenance and cleaningUse a diluted ammonia standard solution and adjust the PH to greater than 11
    temperature compensation10k/22k//2.252K/PT1000/PT100 Optional
    on line operationcan
    isopotential point10 ppm NH4 +
    reference electrodeDouble salt bridge, single hole ceramic liquid boundary
    material qualityPMMA+PVC
    connectterminal
    applyBoiler water, surface water, and fertilizer.

    Controller parameters

    ModelMDS-KP500
    Display4.3 inches, 480*800 resolution, 262K color, IPS screen, wide viewing Angle, with backlight

    Capacitive touch screen with three protection processes (moisture-proof, mildew proof, salt spray proof)
    Display size95.0mm*53.9mm
    Measuring range-99999.0000~99999.0000
    Password ProtectionThe default password is 0000
    Compatible sensorDigital sensor
    Mounting methodDisk mounting (with chassis), wall-mounted mounting
    Alarm relay2 relays can set high and low alarm
    Current output2 isolated 4-20mA, maximum load 750Q, can be set
    Communication portRS485 Modbus RTU
    Memory backupAll user Settings are stored indefinitely in EERPOM
    historical dataThe storage capacity of 8000 points is recorded at a 5-minute interval
    Operating environment-10~+50℃,0~95% relative humidity, no condensation
    Storage environment-20 to +70 ° C,0 to 95% relative humidity, non-condensing
    The power supply12V±10%
    Power consumption of the instrumentless than 6W
    Instrument size144X145X85(mm)
    Protection classIP65





    WeChat MADSUR
    All rights reserved © 2025 Copyright MADSUR